3D LiDAR Scanning in Saudi Arabia · Riyadh

Industrial-Grade LiDAR Scanning for Saudi Arabia Plant Owners

Sub-3 mm accuracy point clouds, captured on the live plant, registered to plant grid, and handed over as a structured point-cloud library plus mesh model for the Jubail Industrial City (east coast petrochem) across Saudi Arabia.

Why Saudi Arabia brownfield work starts with a LiDAR walk, not a model rebuild

Across the Aramco upstream-to-downstream chain, the SABIC integrated petrochemical complexes, and the Vision 2030 giga-projects, a LiDAR-backed reconciliation walk is what makes every downstream engineering deliverable trustworthy. Saudi Arabia's brownfield power-systems work concentrates around Aramco's upstream / downstream complex (Ghawar · Abqaiq · Ras Tanura · Jubail · Yanbu) and SABIC's integrated petrochemical platforms. Vision 2030 has added the Saudization-compliant industrial-cluster build-out, mining at Ma'aden, and the giga-project corridor. Aramco and SABIC's capital stock represents the largest brownfield electrical engineering market in the Middle East. Vision 2030 adds the giga-projects, but the recurring revenue is in the 5-year audit cycle on the existing plants · and that is where the brownfield digital engineering offer fits.

The capture and registration standard we work to in Saudi Arabia

Capture follows ISO 17123-9 for instrument verification with point-cloud registration to ASTM E2807-08 closure tolerances. Where the operator references Aramco SAES (Saudi Aramco Engineering Standards) · Aramco GI (General Instructions) · IEC 60909 · IEC 61936 · NFPA 70E (referenced in SAES-P-100 series), the deliverable formatting layer aligns to it; the underlying capture methodology is invariant.

What you receive · the six LiDAR deliverables for Saudi Arabia

Point-Cloud Registration to Plant Grid

Closure error under 15 mm at the project extents; under 8 mm typical in dense equipment zones. Plant grid established or reconciled at the start, every cloud registered to it, no floating sub-models.

Deliverable Library + Access Setup

Structured E57 / RCP / LGS library with metadata, plus web-viewer access for plant engineering and contractor review. Asset register linked to point-cloud coordinates so the operator can navigate by equipment tag.

Hand-off to As-Built or Digital Twin Workflow

Registered point-cloud library hands directly into the as-built engineering workflow (P&ID, isometric, GA) or the the digital twin platform digital-twin platform, with no re-registration required.

Pre-Capture Survey + Permit Pack

Walk-down survey with the plant electrical authority, hot-work and high-altitude permit alignment with site HCIS + GACA for drone authorisation, target-network design and ground-control survey. Capture begins only after the safety stack is signed.

Tripod LiDAR Capture (Static Scanning)

Leica RTC360 / FARO Focus Premium static capture at sub-3 mm accuracy. Density tuned to the level of detail required: 6-12 mm at process-equipment level, 25 mm at building-envelope level. Coverage planned around the Aramco plot-plan grid.

Drone and Mobile LiDAR (Where Tripod Cannot Reach)

Drone-LiDAR for elevated structures, mobile-scanner trolleys for corridor-heavy plants, handheld LiDAR for restricted bays. The combined capture closes the coverage gaps a tripod-only survey leaves behind.

Three brownfield LiDAR engagements we have delivered in Saudi Arabia

Three Saudi engagements (across Aramco upstream, SABIC petrochem, and Ma'aden mining) that show the working pattern:

Aramco upstream (Eastern Province)

a gas plant with 13.8 kV intake and 3 motor-driven gas-injection compressor trains.

The engagement: SAES-P-114 compliance review found motor starting voltage dip below threshold during simultaneous restart; transient stability study confirmed and revised starting sequence.

SABIC olefins (Jubail)

a 1.5 MTPA cracker with 115 kV grid tie and 13.8 kV distribution.

The engagement: Harmonic measurement at the PCC outside SEC code limit because of the variable-speed drive fleet; filter design and harmonic mitigation program.

Ma'aden mining (northern Saudi)

a phosphate beneficiation plant with 33 kV captive substation and 5 MVA crushing-mill drives.

The engagement: Arc flash incident at the mill MCC initiated full-plant 70E-equivalent re-baselining; HCIS-aligned safe work practice rollout.

LiDAR Scanning in Saudi Arabia · the questions buyers actually ask

Buyer questions we hear consistently across Aramco SAP qualification, SAES conformance, and Saudization conversations:

Are you registered in the Aramco SAP vendor system?

We work through Aramco-approved engineering channels and partnerships. Specific SAP vendor codes depend on project scope; we operate on direct Aramco contracts and as engineering subcontractor under Tier-1 EPCs registered with Aramco.

Does the study satisfy SAES-P / SAES-J review at the SAP / OCC level?

Yes. The deliverable maps to the relevant SAES standards (SAES-P-100 series for power systems · SAES-J for instrumentation · SAES-K for hazardous area) with a conformance matrix at the front of the report.

Can you support the IKTVA local content target?

Yes. Where IKTVA is contractually required, we structure the engagement so that local-content engineering hours fall within Saudi-based subcontractors or partners. The CEng MIE FIE technical authority remains with our chartered engineers.

Tell us what you need scanned in Saudi Arabia. A capture lead responds inside 24 hours.

Scope Your Plant

3D LiDAR Scanning. Saudi Arabia.